Contact Us
Position:Home > News > IndustryNews

Characteristics And Preparation Of Aluminum Boride Powder

2018-11-12      View:

Aluminum boride is a binary compound formed by aluminum and boron. It is a red solid at normal temperature and pressure, loses surface gloss after heating, and is stable in cold dilute acid. It is decomposed in hot hydrochloric acid and nitric acid.

 

AlB12 is a black shiny monoclinic crystal with a specific gravity of 2.55 (18 °C). It is insoluble in water, acid and alkali. It is decomposed in hot nitric acid and melted by boron trioxide, sulfur and aluminum.


 

AlB12 powder was prepared by powder metallurgy using amorphous boron powder and aluminum powder as raw materials. The phase composition, relative content and microstructure of the product were determined by X-ray diffractometry and scanning electron microscopy. The influence of buried powder on the phase composition of the product was studied, and the optimal process parameters of the synthesis process were determined.

 

AlB2 can be dissolved in dilute hydrochloric acid to produce a reducing solution which may contain HB(OH)+3. AlB2 is insoluble in dilute sulfuric acid but soluble in nitric acid. AlB2 is decomposed to form AlB12 at 920 °C or higher.

 

AlB2 can be used not only as a particle enhancer to improve the wear resistance of the alloy, but also to remove the transition element impurities Cr, Ti, V, Zr in the liquid aluminum, thereby improving the electrical conductivity of the aluminum. In addition, due to its high theoretical combustion heat, it can also be used as a fuel additive, and has a good effect in improving the oxidation resistance of carbon-containing refractories.